HTH Alkalinity Up 1kg

Directions for use: To increase pH
– Test your pool water using your HTH Quick Test Strips or HTH 4-in-1 Test Kit
– If pH is below 7 add 1 bottle of HTH Metal Remover as per label instructions before adjusting pH to prevent staining
– If pH is below 7.2, use 1x sachet of HTH pH Up or 250g HTH Alkalinity Up around the sides of the pool with the filter running
– Check the pH after 3 – 4 hours to ensure it is in the correct range of 7.2 – 7.6
– If the pH is still too low, continue to adjust until it is within the recommended range

Directions for use: To increase TA
– Test your pool water using your HTH Quick Test Strips or HTH 4-in-1 Test Kit
– If TA is below 80ppm add 1 bottle of HTH Metal Remover as per label instructions before adjusting TA, add 1kg HTH Alkalinity Up in one spot of the deep end with the filter off
– Leave the motor off for 15 – 30minutes Thereafter, turn the motor on and continue with normal filtration and chlorination
– Only check the TA level after 3 days to ensure it is within the correct range
– If the TA is still too high, continue to adjust until it is within the recommended range